SNIPER

The view of the EPeS technician

"This is a replica that is ready for action right out of the box. The best internal parts are installed to ensure sufficient power and quiet and trouble-free operation.
The triggers used are SCW or ASpro - always the best choice for a particular replica.
Inside the replica, you will also find a stainless-steel cylinder and head with custom-made for the particular repliace complemented by sorbopad for shock absorption, which also protects the parts themselves. Of course, the vibrations between the spring pin, spring, piston, and cylinder are minimized. The piston is always weighted precisely as needed for optimal and cultivated operation.
The inner barrels used are stainless steel Lambda or PDI 6.05 mm or Teflon-Nickel KM head 6.04. The hop up rubbers are MB Sniper Accelerator 60sh, Maple Leaf Super Silicon 70sh or SHS Silicon 70sh - depending on the type of chamber of a particular model.
Hop-up chambers are original, ActionArmy or custom EPeS-CS.
The replica also comes with a suppressor adapter and a functional EPeS suppressor.
TDC is also installed for easier and more sensitive hop-up adjustment."

"Each of the replicas is carefully tuned after assembly and thoroughly tested by shooting at 80-90m where it achieves excellent accuracy.
In terms of performance, they range from 3.2-3.4J, so there will be no problem taking them to most measured events - if the performance is not enough for you, or if it is too high, it is not a problem to adjust it according to your wishes.
If you are interested, you can also buy a great plastic case for the replica, which will fit the replica and a decent scope."

Configuration "SNIPER MARKSMAN"

• Fully assembled replica (precision silencing, adjustment of all clearances, lubrication, all parts fit as they should)
• Springer Custom Works trigger mechanism with a smooth and adjustable trigger stroke
• EPeS CS piston with a spring guide with bearings including Sorbopad (precisely manufactured to eliminate spring vibrations, piston weighted for
• maximum silence and efficiency of the replica with heavy BBs)
• Stainless steel cylinder and spring AirsoftPro
• Stainless steel cylinder head EPeS CS or ASpro
• Adjustment of the clearance between the hop chamber and the cylinder head
• TDC HOP-UP pressure system - precise and fine adjustment
• Hop-up rubber MadBull Sniper Accelerator 60sh, Maple Leaf Super Silicon 70sh or SHS Silicon 70sh including custom pressure segment
• Stainless steel barrel Lambda or PDI 6.05 mm or brass KM head 6.04 with Teflon-Nickel coating (adjustment of the clearance of the inner barrel significantly increases the accuracy of the weapon)
• Suppressor M14x1 LH thread adaptor

Configuration "SNIPER BASIC"

• The replicas are fully assembled (precision silencing, adjustment of all clearances, lubrication, all parts fit as they should)
• EPeS CS piston with a spring guide 
• Adjustment of the clearance between the hop chamber and the cylinder head
• TDC HOP-UP pressure system - precise and fine adjustment with no "click"
• Hop-up rubber MadBull Sniper Accelerator 60sh, Maple Leaf Super Silicon 70sh or SHS Silicon 70sh including custom pressure segment
• Brass barrel SilverBack 6.05 mm (adjustment of the clearance of the inner barrel significantly increases the accuracy of the weapon)
• Compromises for BASIC construction are made on the trigger mechanism, chamber, or cylinder, but it is still a perfect and reliable replica
• Suppressor M14x1 LH thread adaptor