Sady podložek
-
Skladem
10,40 €
8,60 € excl. VAT
-
AR15 barrel nut spacer – 0,1 mm (5 pcs)
Steel spacers for the precise fitting of an AR15 barrel nut (or so-called Delta Ring). Use these spacers to achieve the perfect barrel nut position. It prevents the loosening of the barrel nut, ensures the ideal position of the handguard against the receiver, and provides the firm fitting of the outer barrel.
Skladem
10,40 €
8,60 € excl. VAT
-
AKCE AEG
Washer for gearbox V2 – back screw – 0,1 mm
(E362-01)Washer for gearbox V2 - back screw - 0,1mm and 5pcs in package.
Skladem (35 pcs)
10,40 €
8,60 € excl. VAT
-
Skladem
from 2,30 €
from 1,90 € excl. VAT
-
AKCE AEG
Gearbox washers AEG – 4mm axle
Gearbox washers for AEG - 4mm axle. 0,1 and 0,2mm thicknesses, package by 10pcs.
Skladem
3,30 €
2,73 € excl. VAT
-
AKCE AEG
Washer for motor pressure adjustment AEG
(E363)Washers for use under the thrust bolt / grub screw of the AEG motor, which can be used inside the motor cage or on top of the butt of a pistol grip. Used to adjust how much the motor presses against the rest of the body.
Skladem (185 pcs)
2,50 €
2,07 € excl. VAT
-
AKCE AEG
Spacer washer hop-up chamber / gearbox – 0,1 mm
(E360-01)A set of spacer washers between hop-up chamber and gearbox. Very useful if the nozzle needs to be shortened slightly. No need to disassemble the gearbox - just insert the required number of washers between the gearbox and hop-up chamber.
Skladem (40 pcs)
4,20 €
3,47 € excl. VAT
-
AKCE AEG
Spacer washer for hop-up rubber lip AEG - SET
(E364-SET)A spacer sleeve for the lip of a hop-up rubber bucking (set of 2 pcs in 0.1 mm thickness and 2 pcs in 0.1 mm thickness). This spacer is used to shorten the effective length of the bucking’s lip.
Skladem (81 pcs)
5 €
4,13 € excl. VAT
-
AKCE AEG
AOE spacer pad AEG piston head
A spacer pad for piston head AOE correction – available in 3 different thickness options – 0.5/1/2 mm.
Skladem
from 3,10 €
from 2,56 € excl. VAT
-
AKCE AEG
AOE spacer pad AEG piston weight gain
Special heavier spacer pad for piston head AOE correction and piston load correction - available in 0.5/1/2 mm thicknesses.
Skladem
from 5 €
from 4,13 € excl. VAT
-
AR15 front body pin lock washers
(E263-SET)Lock washers for the front assembly pin of AR15 body. Suitable for AEG and GBB replicas.
Skladem (47 pcs)
4 €
3,31 € excl. VAT