Service and consumables
-
Skladem
from 2,30 €
from 1,90 € excl. VAT
-
AEG
Spacer washer for hop-up rubber lip AEG - SET
(E364-SET)A spacer sleeve for the lip of a hop-up rubber bucking (set of 2 pcs in 0.1 mm thickness and 2 pcs in 0.1 mm thickness). This spacer is used to shorten the effective length of the bucking’s lip.
Skladem (211 pcs)
5 €
4,13 € excl. VAT
-
AEG
AOE spacer pad AEG piston head
A spacer pad for piston head AOE correction – available in 3 different thickness options – 0.5/1/2 mm.
Skladem
from 3,10 €
from 2,56 € excl. VAT
-
GBB HPA AEG
O-ring set for AEG hop-up chamber
Set of O-rings for pushing the hop-up chamber onto the gearbox or fixing the hop-up control elements.
Skladem
from 3,10 €
from 2,56 € excl. VAT
-
GBB HPA AEG
Liquid thread locker / sealant (1 ml)
Thread locking glue in 1ml syringe. Available in low/medium/high strength.
Skladem
3,10 €
2,56 € excl. VAT
-
AEG
Spacer washer hop-up chamber / gearbox – 0,1 mm
(E360-01)A set of spacer washers between hop-up chamber and gearbox. Very useful if the nozzle needs to be shortened slightly. No need to disassemble the gearbox - just insert the required number of washers between the gearbox and hop-up chamber.
Skladem (106 pcs)
4,20 €
3,47 € excl. VAT
-
AEG
AOE spacer pad AEG piston weight gain
Special heavier spacer pad for piston head AOE correction and piston load correction - available in 0.5/1/2 mm thicknesses.
Skladem
from 5 €
from 4,13 € excl. VAT
-
AEG
Screws for AR15 grip AEG
Screw set for AR15 grip AEG. Hex washer screw - 4pcs in 8 and 10 mm length. Hex key included.
Skladem
3,30 €
2,73 € excl. VAT
-
AR15 wrench tool HX
Armorer’s wrench for AR15-type weapons. Available in black, orange, green or pink color, or with blackened surface finish.
Skladem
20,40 €
16,86 € excl. VAT
-
Skladem
4 €
3,31 € excl. VAT
-
HPA
Spare outer seal kit for HPA tanks
(E181-OUT)A spare outer gasket for threaded output of an HPA tank.
Skladem (11 pcs)
4,80 €
3,97 € excl. VAT
-
AEG
Washer for motor pressure adjustment AEG
(E363)Washers for use under the thrust bolt / grub screw of the AEG motor, which can be used inside the motor cage or on top of the butt of a pistol grip. Used to adjust how much the motor presses against the rest of the body.
Skladem (209 pcs)
2,50 €
2,07 € excl. VAT